How do I install my tip?
Step 1: Place the tip onto your exhaust to confirm correct sizing. (It is normal for there to be a gap between your exhaust and the tip itself. This allows airflow and to help prevent the tip from overheating.) The only thing touching your exhaust should be the tabs.
Step 2: Mark on your exhaust where the four holes will be drilled.
Step 3: Use a 5/16th drill bit to drill the four holes.
Step 4: Place the tip on your exhaust and align with the four holes.
Step 5: Use the mounting hardware provided to bolt on the tip. You will need a 7/16th socket and wrench. (It is recommended that you bolt the top and bottom tabs on first to help stabilize the tip.)
* Please use the mounting hardware provided. If any other hardware is used, your warranty will be voided.
* DO NOT WELD THE TIP!! Your warranty will be voided.